Working principle of water ring compressor

There are many types of compressor equipment on the market, among which the water ring compressor is a very popular one. Not only is it affordable, but it also works very well. So how does the device work? Let's take a look together.

Mainly used for adjusting the stop state of air compressors, adjusting the pressure of the air tank to stop the air compressor from resting and maintain the machine.

When debugging the air compressor factory, adjust the specified pressure and set the differential pressure according to customer requirements. For example, the compressor starts running and injects air into the air tank. When the pressure reaches 10 kilograms, the air compressor stops or unloads.

The motor directly drives the water ring compressor, causing the crankshaft to rotate, driving the connecting rod, causing the piston to undergo reciprocating motion, causing a change in cylinder volume.

Due to pressure changes inside the cylinder, air flows into the cylinder through the intake valve and the air filter. During the compression stroke, the cylinder volume decreases. Therefore, compressed air acts through the exhaust valve and enters the air tank through the exhaust pipe and one-way valve. When the exhaust pressure reaches the rated pressure of 0.7MPa, the pressure switch will automatically stop.

When the pressure of the gas tank of the water ring compressor drops to 0.5-0.6MPa, the pressure switch will automatically connect.

So the above is a specific introduction to the working principle of the water ring compressor. Therefore, everyone should understand that in order to better operate and use the equipment, it is necessary to learn more about its related content, so as to better utilize the knowledge they have mastered to use the equipment.