Roots Vacuum Pump Selection Precautions
Aug 19, 2022
1. The working pressure of the vacuum pump should meet the requirements of vacuum equipment and limited vacuum and working pressure.
2. Correctly select the working point of the Roots vacuum pump. Each type of pump has a certain working pressure range, and the working point of the pump should be selected within this range, rather than allowing it to work for a long time at 10-8mmHg.
3. Under its working pressure, the vacuum pump should be able to remove all the gas generated in the process of the vacuum equipment.
4. Correctly combine the vacuum pump. Due to the selective pumping of vacuum pumps, sometimes one type of pump cannot meet the pumping requirements, and several pumps need to be combined to complement each other to meet the pumping requirements. In addition, some vacuum pumps cannot work under atmospheric pressure and require pre-vacuum; some vacuum pumps have an outlet pressure lower than atmospheric pressure and require a backing pump, so they all need to be used in combination.
5. Requirements for oil pollution of vacuum equipment. If the equipment is strictly required to be oil-free, various oil-free pumps should be selected. If the requirements are not strict, oil pumps can be selected, and some anti-oil pollution measures, such as adding cold traps, baffles, oil baffles, etc., can also achieve cleanliness vacuum requirements.
6. Understand the composition of the pumped gas, whether the gas contains condensable vapor, whether there is particle dust, whether it is corrosive, etc. When choosing a Roots vacuum pump, you need to know the gas composition and select the corresponding pump for the gas to be pumped. If the gas contains vapor, particles, and corrosive gases, it should be considered to install auxiliary equipment such as condensers, dust collectors, etc. on the inlet pipeline of the pump.
7. How does the oil vapor discharged from the vacuum pump affect the environment?
8. Whether the vibration generated during work has any influence on the process and the environment. If the process does not allow, choose a pump without vibration or take anti-vibration measures.
9. The price, operation and maintenance cost of the vacuum pump.






