Horizontal Slurry Pump

ZJA series two-phase flow horizontal slurry pump uses advantages of foreign similar product, combines the reality of domestic application industries and fully considers motion situation of solid-liquid flow field during water conservancy design, so it can keep good performance and long fault-free use during slurry conveyance and is the latest efficient and energy-saving product. Because of excellent performance and applicability to severe mines, the series of product is widely used for electric power, iron, metallurgy, paper-making, chemical industry, mine and other industries. ZJA series horizontal slurry pump has the following outstanding characteristics and advantages:

1. High Efficiency and Energy Saving

General trash pump has reduced efficiency when conveying the slurry, the higher concentration, the larger grain size, the larger reduction range. While two-phase flow slurry pump has higher efficiency when conveying the slurry than that of conveying clear water because the pump is designed in accordance with solid-liquid two-phase flow, and is more suitable for conveying slurry than clear water. Through rise and reduction, the operating efficiency of two-phase flow pump is improved by 3-10%, so the pump has new energy conversion law.

● It is made of enclosed impeller and twisted blade to ensure surface finish of flow passage components and improve 3-10% of efficiency than cylindrical blade.

● It adopts thin oil lubrication method, so it has higher reliability than similar products, is more suitable for use pattern of Chinese manufacturing industry, and reduces the labor intensity of workers.

● Front and rear cover plates of the impeller have back blades to timely discharge backflow slurry, improving volumetric efficiency, reducing backflow and erosion and improving the service life and efficiency of flow passage components.

● It adopts the same series of drive parts, including bracket and bearing assembly. Its pump shaft has large diameter, good rigidity and short cantilever, so it doesn’t generate bending deflection or vibration in severe conditions.

2. Corrosion Resistance, Prolonged Service Life

● Adopt new technology and new process: To ensure casting quality, it adopts advanced resin sand molding process to improve internal quality and surface quality of casting. It adopts medium frequency furnace for smelting and is easy to control the growth of internal crystal of material, adopts stokehold material chemical composition measurement and advanced imported spectrum analyzer, and has rapid test and high accuracy rate, so it effectively controls chemical compositions in the casting.

● Rational design, precise material selection. Flow passage components are made of high chromium antifriction alloy Cr26 with hardness of HRC55~HRC64, ensuring that the pump has good corrosion resistance and is suitable for use in severe working conditions.

● The shaft adopts dynamic seal (auxiliary impeller+ packing seal) or mechanical seal according to working conditions, and mechanical seal preferentially selects centralized mechanical seal. The type of seal can fit requirements for conveying different media, has convenient installation and use, and can work normally without flushing water.

● Deep groove ball bearing and angular contact ball bearing common heavy single row or double row tapered roller bearing produced by Wafangdian Bearing Factory is used according to different transmission power. Accurate bearing positioning and service life of over 200000h ensure long-term and reliable operation of the pump.

3. Water Conservation, Applicability to High-concentration Conveyance

● The performance of general trash pump gradually deteriorates with the increase of slurry concentration. While two-phase flow pump takes the movement conditions of solid (including concentration, grain size and shape) into full account during hydraulic design, has good hydraulic performance when conveying high concentration (general weight concentration γG can reach 60~70%) slurry and meets the requirement of process flow on high concentration, so two-phase flow pump is suitable for requirement of conveying high-concentration slurry.

● Special solid-liquid two-phase flow design makes the maximum weight concentration of conveyed solid-liquid mixture reach: mortar 45%, pulp 70%, saving water and energy and improving solid conveyance in unit time. Each pump undergoes strict test before delivery to ensure that lift error is ±5%, shaft power error is ±5%, flow error is ±5%, vibration speed is less than 4.5mm/s, noise is less than 80dBA (1m away from the pump) and performance meets the quality requirement of long-term operation.

4. Large Flow Passage Capacity, Larger Particle Passage

● Reduce blade quantity, normally 5 pieces, generally 2~8 pieces

● Greatly improve flow passage capacity and effectively prevent solid phase crystallization blockage by increasing the width between impeller inlet diameter and blade,

● Adopt open impeller. Because the medium for conveyance contains partial solid particles with large diameter under special working conditions, enclosed impeller is easy to cause impeller blockage, so that the pump cannot work normally, while open impeller can solve the problem thoroughly.

● Each pump undergoes strict test before delivery to ensure that lift error is ±5%, shaft power error is ±5%, flow error is ±5%, vibration speed is less than 4.5mm/s, noise is less than 80dBA (1m away from the pump) and performance meets the quality requirement of long-term operation.

5. Good Anti-cavitation, High-position Installation Capability

● The impeller is casted by resin sand to improve the surface finish of the runner, and polishes and cleans runner surface, reducing the resistance of medium in the runner.

● Increase impeller inlet diameter to reduce flow rate.

● The improved ZJA series horizontal slurry pump has better anti-cavitation and lower noise and vibration than other similar products, and can be installed in a high position.

ZJA series product has become the first choice of import substitute in domestic slurry pump industry due to excellent performance.

ZJA series product has become the first choice of import substitute in domestic slurry pump industry due to excellent performance. In January 2002, our company conducted localization transformation on slurry pump worthing hundreds of thousands of USD introduced by Ansteel from America, and the transformed pump has outlet diameter of 16 inches, the largest diameter in Chinese slurry pump and volute single weight of 3T. After the use, the performance fully meets the requirements of working conditions, and it can save nearly USD one million of foreign exchange for Ansteel each year and win the praise from users.

Bsed on market guidance and people orientation, the company will enhance the sense of ownership of the staff, increase technological development, promote continuous upgrade of product structure and meet customer demands with "high quality, excellent service".