What Are The Spare Parts Of The Vacuum Pump?
Aug 12, 2022
Let's take a look at the spare parts of the vacuum pump, as follows:
1. Vacuum pump sealing kit, the sealing kit will be damaged after long-term use of the vacuum pump due to the disassembly of the pump body.
2. Vacuum pump oil mist separator, the vacuum pump sprays oil and emits black smoke, in fact, the vacuum pump oil mist separator has failed and cannot achieve the purpose of separating pump oil and gas, so a small amount of vacuum pump oil is ejected from the exhaust port of the vacuum pump. With a lot of black smoke, this is also one of the main replacement parts for the maintenance of the vacuum pump.
3. Vacuum pump oil filter, one of the pump accessories is often replaced. It is mainly used to filter unidentified foreign matter such as impurities in the oil to achieve the purpose of protecting the vacuum pump. It is very easy to use unqualified vacuum pump oil vacuum tip oil filter and oil mist separator. damage, resulting in greater losses.
4. Vacuum pump oil, vacuum pump oil is one of the common consumables that must be replaced in the maintenance of vacuum pumps. Pump oil is also a place where impurities and unknown objects are accumulated. If one of the core consumables of vacuum pump is not replaced immediately or added with special vacuum pump oil, it is very easy to damage the vacuum pump. of normal work.
5. Bearings, shaft seals, and high-speed rotation of the vacuum pump will cause sudden high-speed operation of the vacuum pump due to the start of the pump. During such long-term use, the bearings will be continuously worn and depreciated, causing damage and failure. If the bearing fails, the vacuum pump rotor will be slightly biased. The displacement causes the friction between the vane and the cylinder to increase and damage the vane.
6. Vacuum pump blades, if the noise of the vacuum pump increases during long-term use, it can be considered that the blades are damaged or there are unknown objects entering the cylinder body to cause increased friction. Such problems should be dealt with in time to avoid the increase of failure problems.






